For those of us with a KX3 instead of a K3, what would be the frequency cutoff for “three lowest bands”?
wunder K6WRU CM87wj http://observer.wunderwood.org/ On Sep 17, 2014, at 5:52 PM, Jim Brown <[email protected]> wrote: > On Wed,9/17/2014 3:52 PM, Ignacy wrote: >> I also found by testing on the other radio that CM500 sounds very different >> close (bassy) and a bit apart (more balanced). > > For most voices, a good starting point for TXEQ with the CM500 is to fully > cut the lowest three bands, cut the 4th band about 6dB, leave all the others > at 0 dB. Then get some critical signal reports from hams you trust to have > good ears. > > 73, Jim K9YC > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
