The TXEQ settings for the KX3 are the same as for the K3.
73,
Don W3FPR
On 9/17/2014 9:16 PM, Walter Underwood wrote:
For those of us with a KX3 instead of a K3, what would be the frequency cutoff
for “three lowest bands”?
wunder
K6WRU
CM87wj
http://observer.wunderwood.org/
On Sep 17, 2014, at 5:52 PM, Jim Brown <[email protected]> wrote:
On Wed,9/17/2014 3:52 PM, Ignacy wrote:
I also found by testing on the other radio that CM500 sounds very different
close (bassy) and a bit apart (more balanced).
For most voices, a good starting point for TXEQ with the CM500 is to fully cut
the lowest three bands, cut the 4th band about 6dB, leave all the others at 0
dB. Then get some critical signal reports from hams you trust to have good ears.
73, Jim K9YC
______________________________________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
