Dave,
That sounds like you do not have enough audio drive.
You *must* have an indication of 4 bars on the ALC meter with the 5th
bar flickering.
The K3 power control depends on having sufficient audio - it is
different than other transceivers, so ignore the normal advice found on
the internet.
Bring the audio up until you see those 4 to 5 bars and adjust the power
knob to produce the desired power output.
Do *not* attempt to use the audio drive as a means of controlling power.
If you are using the Line In, you may have to set the Rigblaster for
line level output (high) rather than microphone level.
73,
Don W3FPR
On 9/23/2014 2:07 PM, Dave Bell via Elecraft wrote:
My lineup is old IBM desktop computer running XP, Rigblaster Advantage,
fldigi, and the K3.
I can print signals fine. Waterfall is good.
Two problems: While the waterfall looks good when I'm transmitting, I'm not
getting any indication on the K3 -- no power out, no ALC and I am not in
TEST mode. The transmit light on the Rigblaster Advantage goes red and my
outgoing message changes from black to red as it's sent, but somehow it
isn't getting to the K3. I have the VOX on, but the Rigblaster (or fldigi)
also keys the PTT.
Also, at the conclusion of sending a macro, the red light goes out on the
Rigblaster but the transmitter doesn't go to receive until I push the XMIT
button on the K3.
I have checked all of the connections several times, and they seem correct
but I'm open to comments.
Any questions or suggestions?
73, Dave
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
