I'm hoping someone here might have had a similar issue, and save me some time.
I recently installed a KAT1 into my K1-4. I have 40, 30, 20, and 15 meters installed in the K1. Symptoms: low output (0.1w) on 40 meters and 30 meters. KAT1 will not match to 50 ohm dummy load on 40 meters. I have cycled through the ATU menu, checking the SWR reading on each band, for L0-4 and C0-5. I'll post the results in a separate email. The relays are clicking on each band change, and for each L and C change. The pattern wasn't clear to me; does this point me to C5? The unit was working properly after KAT1 installation. I.e., the problem is new. I've reheated the KAT1 toroid leads, thinking I might have a cold joint. no joy. Does this ring any bells for anyone? Many thanks, and 72. Randy NC4RT ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
