David,
What do you have connected to the ACC2IO jack? Is there possibly
anything there that could be holding that signal to ground?
73,
Don W3FPR
On 10/18/2014 9:27 AM, David - KI4UVC wrote:
Love my KX3 but ran into some strange behavior as of late with some hangs.
Running MCU 2.25 / DSP 1.30 when trying to change ACC2IO settings, when I
turn VFOA to LO=Ptt the unit hangs on the LO=Ptt option - display freezes at
LO=Ptt and I can't PWR off using ATU/BAND-.
I've tried re-flashing MCU/DSP firmware with KX3 utility and even tried
EEINIT reset - still the same hanging on ACC2IO menu.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
