Vic,
Cannot really tell what's happening, but I have a suggestion for your BC
bandfilter.
Connect the filter to the RX ANT in and out connectors, and switch on
the RX ANT.
Now you can transmit the normal way and use the filter for receive only.
73
Arie PA3A
Vic Rosenthal 4X6GP/K2VCO schreef op 23-10-2014 12:58:
<snip>
I tried one more experiment: I have a BC band filter which is used
with the MFJ antenna analyzer when there are nearby BC signals. Sure
enough, putting this in series with the K3 ANT 1 connector kills the
noise. Of course I can't transmit through it.
Has anyone had a similar problem? I am thinking that the solution is a
highpass filter or trap at this spot. I don't operate on 160, so it
shouldn't be too hard to make.
<snip>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
