This can easily be RFI in the shack. What kind of cabling, antenna, or grounding change have you made recently? Have you had the K2 under repair recently?
Causes can be as simple as forgetting to tighten the shell of a PL259, or the mic cable shield coming undone, or the mic cord connector wearing out. Think TX RF getting back into the circuitry and keeping a circuit high that would otherwise go low when you let go of the mic. 73, Guy. On Thu, Nov 13, 2014 at 9:54 AM, Leroy Marion <[email protected]> wrote: > Here is a different problem for K2 gurus: > > > > Using a Kenwood MC-60, when keyed it toggles the K2 into transmit, > > and won't come out of transmit until you cycle power switch. > > Hand mic or Heil with foot switch works fine. > > Batteries in or out of MC-60 makes no difference. It worked for > > Years normally. > > ??? > > Leroy AB7CE > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
