Leroy,
Because the K2 works OK with other microphones, that would suggest that
you have some problem with the MC-60 microphone itself.
Does the K2 drop out of transmit if you remove the mic plug from the K2?
Any chance you are using the LOCK button on the mic instead of the PTT
button? Do the two buttons have some 'goo' in them holding them in the
active position for a time (slow button release)?
Is the spring which restores the PTT button to the rest position weak?
73,
Don W3FPR
On 11/13/2014 9:54 AM, Leroy Marion wrote:
Here is a different problem for K2 gurus:
Using a Kenwood MC-60, when keyed it toggles the K2 into transmit,
and won't come out of transmit until you cycle power switch.
Hand mic or Heil with foot switch works fine.
Batteries in or out of MC-60 makes no difference. It worked for
Years normally.
???
Leroy AB7CE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
