Yes the SteppIR will follow the radio. I don't have a KPA500 so cannot answer that one.
73, Mike NF4L > On Nov 22, 2014, at 5:58 AM, Anton Koval, MW0EDX via Elecraft > <[email protected]> wrote: > > GM/GA/GE, > The K3 question in connection with Steppir yagi(s). > Will Steppir yagi follow K3 in the same manner as it follows Icom rigs, that > is, one tunes the Icom rig and the Stepper exactly follows it or does one > need to transmit on K3 so the Steppir knows where to tune ? Or even manually > tune the Steppir controller ? > I am thinking of swapping my Icom for K3, but I had bitter experience with a > FT-2000D and Steppir and Expert amp combination when Steppir would not > automatically follow the tuning dial on the FT2000D - but only when RF power > was applied.... > I understand that K3 can change, depending on the bands, drive power to > equally drive the KPA500 so the same output power will be on all bands ? > Thanks, > Anton Koval > > MW0EDX & MW5R > > [email protected] > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
