On Sat,11/22/2014 2:58 AM, Anton Koval, MW0EDX via Elecraft wrote:
I understand that K3 can change, depending on the bands, drive power to equally drive the KPA500 so the same output power will be on all bands ?
Yes, the K3 can be set to remember drive power by band and mode. The KPA500 does not need a control line from the rig to change bands -- it detects the TX frequency with a dit or a tap on the mic. There is a control line, but I've never used it. The only control that is needed is PTT from the rig to the KPA500.
There is a serial port. The only thing I use it for is to load firmware updates.
73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
