Bonjour Jacques, Merci pour votre reponse!
TX output 2W: Do you apply enought supply voltage? Min 2.5W are specified with 13.8VDC supply. Birdies: Yes, it has quite a few. But for my use this is much less tragic than the CW trouble. Hope you will find a solution for your usage. Merci es 73, paul hb9axl ---------------------------- Sorry Paul, no answer to your problem with CW (not yet tried). On my side, I am a bit disappointed with my KX3-2m because of low TX output (2W instead of 3 announced) and lot of birdies on dummy load in RX mode. When using an external antenna, noise level increases and some birdies disappear but not all especially on 144.400 MHz. Do not try to connect an antenna (flexible quarter wave in my case) directly on SMA socket, you will receive a lot of birdies so, no way to use my KX3-2m like I used to do at the end of 70's with my IC-202 transceiver and telescopic antenna. Any way to cure my problems? 73's. Jacques F6AJW/Paris Le 21/11/2014 18:05, paul hippenmeyer a ?crit :
Hi all, CW on 2m is a problem. Especially with speeds higher than 25 wpm the timing of the sidetone becomes very unregular (eg. continues keying of dots only). With an external keyer the problem seems to be even worse. QRQ CW sounds very dirty. CW on HF bands is perfect. Any others who can confirm this problem? 73, paul hb9axl MCU 2.25 DSP 1.30
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
