Hold down the QSK side of the [BAND] button watch the VFO B text Holding down the QSK side again, toggles between FULL and SIMI break in. the VFO B text will tell you when it switches, as well as the QSK text under VBO A's display when you are in FULL
from page 30 in the manual: Hold QSK to select full break-in (QSK icon on) or semi break-in operation. QSK allows others to “break” your CW transmission by sending one or two characters. With semi break-in selected (QSK off), the K3 returns to receive mode after a time delay you set using DELAY. VOX must be turned on in CW mode to enable both full and semi break-in operation. If PTT is selected (VOX icon off), transmit must be activated using PTT or by tapping XMIT . PTT is sometimes activated using a foot switch. For ultra-fast CW full break-in at up to 100 WPM, set CONFIG:CW QRQ to ON. If CW QRQ is OFF, max speed using VOX is 60 WPM, and PTT is required for 60 to 100 WPM. 73 & GB K5OAI Sam -- View this message in context: http://elecraft.365791.n2.nabble.com/K-Line-Full-break-in-tp7595245p7595258.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
