For sale:
from Jim, KL7CC

email:  [email protected]

Offered here to list members for to 1 week. If not sold here, then it goes to eBay, at a higher asking price.

Offers are welcome. I may decide to accept a different price, or a partial trade. Send me an email with your
offer to find out.

Professionally assembled and calibrated Elecraft K2 station for sale. CW, data or SSB, 160 through 10 meters.

Assembled and tested by professional electronics engineer and quality assurance specialist. 100% operational, meets or exceeds all current specs. From a non-smoking environment, with many accessories and extras. Will sell the K2 by itself, or the combined K2 + amp/tuner, or just the amplifier-tuner.

Save US $100.00 with the combo price.

The K2 radio can be coupled to the 100-watt amp + automatic antenna coupler for a completely integrated home or RV mounted station. The 100-watt amplifier + automatic antenna tuner is in a separate enclosure for maximum operational flexibility.

For emergency or easy to carry portable use, simply disconnect the cables between the two boxes, leaving a low powered (approximately 15 to 20-watt) station that is complete with its own internal auto-coupler and gel-cell battery. In this configuration, you get a complete station that fits inside a zip-up lockable canvas carry bag (Samsonite) that is about the size of "fat" 3-ring binder

Run-time on internal battery is of course dependent on charge and transmit power level, but typically it will be good for an entire weekend of casual CW or SSB contacts. The battery can be charged from external 12-volts DC, or by using the supplied AC powered charger / power supply.

All items are in very good cosmetic condition, no dents, chipped paint, or scratches (a few very light wear markings) and are from a non-smoking environment.

Internal and external photographs are available on request.

Price _includes_ prepaid insured shipping via USPS Priority mail or FedEx 2nd day air (my option) to all 50 US states and territories.

Shipping to other countries will be calculated as needed, and is in addition to prices quoted. Applicable customs fees and other import charges, if any, are the responsibility of the purchaser.

Contact me off list for additional information and answers to your questions. send email to: [email protected]

_______________________

Basic radio: Elecraft K2 S/N 3935 (see also: separate 100-watt amplifier / antenna coupler, below)

This K2 includes all software and hardware updates and mods to meet current production specs

Options included with base K2 radio (all fully assembled and tested unless noted):

KSB2 SSB adapter
KIO2 RS-232 interface
KAT2 Automatic antenna coupler (20 watt internal)
KNB2 Noise blanker
KDSP2 Advanced DSP filter and real-time clock
KBT2 Internal battery (with new battery)
K160RX 160-meter and 2nd RX antenna module
FDIMP Finger dimple for tuning knob

Original Rev. E assembly manual with updates. (manual is completely free of pen/pencil marks)

New, unused K2VCO shield kit (not needed and never installed, since 100-watt PA is in an external cabinet)
New, unused ETS-2 tilt stand

Note: the 60-meter option is not included. This module is available directly from Elecraft if that band is of interest to you

Included non-Elecraft options:

Nifty operators guide. Covers every aspect of operating the K2. Has condensed operating instructions for all modes and options

Samsonite lockable padded canvas Zip-up carry case (holds K2, mic, paddle, user manual, headset (not supplied), a small roll of antenna wire (also not supplied) and still has room for a few widgets of your choice)

4-amp light weight 120 VAC powered automatic battery charger / DC power supply

Set of Deluxe Rework eliminators (new, unused and never assembled)

Loudspeaker sound redirector (changes sound from K2 cabinet speaker from top to forward firing). Attaches with Velcro, easily installed or removed

all necessary cables (everything except the antenna and feedline, that's your choice)

New price, for all items listed above, approx  US $1800.00

Asking:  US $1100.00 (add  US $25.00 if using PayPal)



Optional items,  at extra charge (sold only with above radio)

Palm mini-paddle, with cable, gray (matches K2 color): US $65.00 (new price: US $120.00)
Kenwood MC-43 hand microphone  US $25.00  (new price:  US $45.00)
Heil Pro-set (headset / microphone combo)  US $75.00 (new price: US $110.00)

____________________________________


Also available: Combined KPA100 (100 watt amplifier) and KAT100-2 100-watt automatic antenna coupler in separate EC-2 case, including all interconnecting cables and power cords. Covers 160 - 10 meters, fully automatic bandswitching when connected to base K2 radio

As before, professionally assembled and tested by electronics engineer / quality assurance specialist. 100% operational, meets al specifications. Excellent appearance (same as radio, as described above), from a non-smoking environment.

Photos available on request

Amplifier / Antenna coupler / RF and DC cables:

New price approximately US $730.00 (including the RF, DC power, and control cables that were not supplied as part of the original kit)

Asking US $400.00 if sold with radio (US $500.00 if sold separately) Add US $15.00 if using PayPal

Optional at extra cost: 120-volt super-small DC power supply that provides up to 18 amperes at 13.8 volts DC. This compact power supply can run both the radio and the 100-watt amplifier combination Asking US $75.00 for this unit, sold only with the amplifier.

Price _includes_ prepaid shipping via USPS Priority mail or FedEx 2nd day air (my option) to all 50 US states and territories. Shipping to other countries will be in accord with the statement for the base radio, above.



Jim, KL7CC
Anchorage, AK

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to