Hi Don, Good to hear of this. No it was built as a CW-only radio. I am making a list to send to Madelyn Monday. I kept the 100W PA that you saw a year ago. This radio will then have that PA on it in a few weeks (if I have time over the holidays hi hi) Frank KG9H
On Dec 7, 2014, at 7:03 AM, Don Wilhelm <[email protected]> wrote: > Frank, > > Do you have the KSB2 option installed in that K2? > If so, the SSB FL1 filter should be set to "OP1" instead of "2.2". > > If you do have the KSB2 option, look at the board. First check the markings > on the crystals > If they are 4913-S you have the new crystals on that board. > Then see if there are capacitors in the CB and CN locations. If not, the > width is the newer 2.4kHz, but if you do not have capacitors there, you can > order the K2SSBCAPKT and change the width to 2.4kHz (or even 2.6kHz if your > BFO range is sufficient). You must have the 4913-S crystals installed to > take advantage of that increased filter width. > New KSB2 options come with capacitors for the 2.4kHz width. > > 73, > Don W3FPR > > On 12/6/2014 9:09 PM, Frank Krozel wrote: >> OK, pondering this after listening on the K2 to SSB tonight…. Has anyone >> tried to align the SSB module to get something more then 2.2kHz? >> I was thinking of 2.4, 2.0, 1.7 as my filters when I get the SSB module. >> Frank KG9H >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
