The entire premise behind the KX-Line is that you can quickly disconnect the KX3 from the PX3 and KXPA100, then take the rig to field sites where minimum size/weight/cables/current drain are important criteria. Examples: living room easy chair, breakfast nook, yagi feed-point, mobile, HF pack, bicycle, motorcycle, tree fort, laundromat, Starbucks, 747, dentist, tanning salon, confessional....you get the idea.
Wayne N6KR On Dec 10, 2014, at 5:24 AM, "Charlie T, K3ICH" <[email protected]> wrote: > Waddaya bet some entrepreneur makes a rear box so both can be a single solid > unit? > > Howzatt for cool? > > Of course, there's always duct tape. > > Chas > ----- Original Message ----- From: "Howard Hoyt" <[email protected]> > To: <[email protected]> > Sent: Wednesday, December 10, 2014 12:18 AM > Subject: [Elecraft] PX3 question > > >> Stan, >> >> If you position the PX3 to the left of the KX3, the two units can be >> positioned within 0.5" of each other when using all right-angle plugs, which >> makes the combined chassis width 13.5". >> >> We make a #33-100 KX3 & PX3 DC Power Splitter which helps facilitate neat >> cable management for users of the KX3 & PX3 >> (https://proaudioeng.com/accessories/). If you are using straight plugs for >> your headset, you can position them as much as 2.25" apart and still use the >> splitter. >> >> You could also reverse the positions, in which case if you are using the >> splitter the PX3 can be positioned up to 1.25" to the right of the KX3, and >> you would have to use a right-angle BNC for the antenna connector. >> >> An additional 1" or more of separation can be achieved by removing the >> heatshrink and tape holding the two conductors of the splitter if necessary. >> >> Cheers & 73, >> >> Howie - WA4PSC >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
