Yep, I can see it now: "Father, I have sinned by staying home to operate my KX3 in the CW contest instead of coming to Mass."
"You are forgiven, my son. By the way, what's that strange beeping sound I'm hearing?" 73, Al On Wed December 10 2014 10:46:11 am Wayne Burdick wrote: > The entire premise behind the KX-Line is that you can quickly disconnect > the KX3 from the PX3 and KXPA100, then take the rig to field sites where > minimum size/weight/cables/current drain are important criteria. Examples: >... confessional....you get the idea. > > Wayne > N6KR > > On Dec 10, 2014, at 5:24 AM, "Charlie T, K3ICH" <[email protected]> wrote: > > Waddaya bet some entrepreneur makes a rear box so both can be a single > > solid unit? > > > > Howzatt for cool? > > > > Of course, there's always duct tape. > > > > Chas > > ----- Original Message ----- From: "Howard Hoyt" <[email protected]> > > To: <[email protected]> > > Sent: Wednesday, December 10, 2014 12:18 AM > > Subject: [Elecraft] PX3 question > > > >> Stan, > >> > >> If you position the PX3 to the left of the KX3, the two units can be > >> positioned within 0.5" of each other when using all right-angle plugs, > >> which makes the combined chassis width 13.5". > >> > >> We make a #33-100 KX3 & PX3 DC Power Splitter which helps facilitate > >> neat cable management for users of the KX3 & PX3 > >> (https://proaudioeng.com/accessories/). If you are using straight plugs > >> for your headset, you can position them as much as 2.25" apart and still > >> use the splitter. > >> > >> You could also reverse the positions, in which case if you are using the > >> splitter the PX3 can be positioned up to 1.25" to the right of the KX3, > >> and you would have to use a right-angle BNC for the antenna connector. > >> > >> An additional 1" or more of separation can be achieved by removing the > >> heatshrink and tape holding the two conductors of the splitter if > >> necessary. > >> > >> Cheers & 73, > >> > >> Howie - WA4PSC > >> ______________________________________________________________ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:[email protected] > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: http://www.qsl.net/donate.html > >> Message delivered to [email protected] > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
