Maybe there is not enough voltage at the power input to the radio — possibly due to high resistance at your power connections or in your fuse holders?
73, Matt VK2RQ > On 15 Dec 2014, at 8:18 am, Bruce Chadbourne <[email protected]> > wrote: > > To the list: > > I occasionally get the Hi Current warning on my K3. I notice it cuts my > power back about 10% from 100w. My initial assumption is that my SWR is > too high - but the SWR meter is easily less than 2.0 I run the ATU which > confirms SWR about 1.2 or so. > So what am I missing - something bad in my transmission line? > > -- > Bruce KE1CY > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
