I see the same thing, but only on 10m. I just assumed (possibly erroneously) the power indication was not accurate and used the indicated 100w. I don't have an external wattmeter to validate. My antenna is tuned for 20m so tuning it is not that hard on 10m.
Eric wb7sde On December 14, 2014 9:23:15 PM PST, Matt VK2RQ <[email protected]> wrote: >Maybe there is not enough voltage at the power input to the radio — >possibly due to high resistance at your power connections or in your >fuse holders? > >73, Matt VK2RQ > > >> On 15 Dec 2014, at 8:18 am, Bruce Chadbourne ><[email protected]> wrote: >> >> To the list: >> >> I occasionally get the Hi Current warning on my K3. I notice it cuts >my >> power back about 10% from 100w. My initial assumption is that my SWR >is >> too high - but the SWR meter is easily less than 2.0 I run the ATU >which >> confirms SWR about 1.2 or so. >> So what am I missing - something bad in my transmission line? >> >> -- >> Bruce KE1CY >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
