Rick,

The cable kit makes it 'plug-n-play'. Well worth the $39.95 IMHO, but may vary on how you value your time and frustration level.

73,
Don W3FPR

On 12/15/2014 7:01 PM, Rick Dettinger wrote:
Thanks Don,

I did read the instructions wrong.  I was distracted by the idea that the KXPA100 would 
be "plug and play" with the companion KX3 transceiver.  Since it is unlikely 
that I will be able to find a cable with an RCA plug on one end, and a 2.5 mm stereo plg 
on the other, without tip wire, it looks like a custom job.
I don't know if I would have a use for the features of the KXCABLE, since I 
don't have a high power amp, a KXAT100 or a computer in my shack.
I do appreciate the fact that it would be necessary to modify connection cables 
for unknown brand X transceivers.


73,
Rick Dettinger  K7MW









On Dec 15, 2014, at 3:35 PM, Don Wilhelm wrote:

Rick,

The manual does *not* state that an RCA plug will be used on both ends of the 
Keyline cable.
Yes, the KXPA100 end is an RCA plug and that is clearly shown, but the other 
end must match the transceiver and since several types of connectors are used 
on transceivers for KEYOUT, the KXPA100 must be ambiguous about the connector 
on the transceiver end (i.e. the FT-817 uses a DIN connector IIRC).

In the case of the KX3, a 2.5mm stereo plug is needed.  The ring contact is 
keyline output and the shield or common conductor of the cable connects to the 
shell.

It may be easier to just order the KXPACBL than cutting your cable and wiring 
in the 2.5mm stereo plug.

73,
Don W3FPR

On 12/15/2014 5:19 PM, Rick Dettinger wrote:
Guess what? I need assistance!
I am attempting to connect my KX3 to my new KXPA100, and am stumped with the 
Key Line Cable shown on page 8.
This is a doubled ended RCA plug type cable.  It references fig 5 on pg 18 for 
the basic installation, (no KXPACBL).
Paragraph 6, pg 19, seems to say that the Key Line Cable goes to ACC2 on the 
KX3.  Great, except the RCA plug does not  come close to fitting the 3.5 mm 
ACC2 jack.  What am I doing wrong?

73,
Rick Dettinger  K7MW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to