The next segment after the "10" on the CMP scale occasionally flashes.
Cheers, Mark F... VK3ZMF / VK3KW KX3 with the lot # 1675 KXPA100 # 530 PX3 # 233 > -----Original Message----- > From: Kd8nnu [mailto:gold...@charter.net] > Sent: Sunday, December 28, 2014 12:35 AM > To: vk3...@bigpond.com; 'Carl Jón Denbow'; elecraft@mailman.qth.net > Subject: Re: [Elecraft] Heil Proset KX3 Element? > > Compresdion at 25 seems high compared to my setup. I use 17 on mine > which gives 10 db according to the display. How many db is 25 with your > setup i am curious as i have the same mic. > > > > Sent on the new Sprint Network from my Samsung Galaxy S®4. > > > -------- Original message -------- > From: Mark Forsyth > Date:12/27/2014 1:26 AM (GMT-06:00) > To: 'Carl Jón Denbow' ,elecraft@mailman.qth.net > Subject: Re: [Elecraft] Heil Proset KX3 Element? > > G'day Carl, > > If you get aggressive with TX EQ you can make the Heil iC element sound > pretty good. If you can get someone who knows your voice to listen while > you make adjustments you should be able to come up with settings that suit > your voice. > > I started out with the settings outlined on the Heil All things Elecraft page > - > it's at http://www.heilsound.com/amateur/dsp-settings/125-all-things- > elecraft and with the help of another operator finally came up with the > following :- > > -16, -16, -06, +00, +06, +12, +12 and +09 for TXEQ. > Compression is at 25 and mic gain is high enough to have the fifth, and > occasionally the sixth, ALC bar flickering. > > With those settings I often get unsolicited reports of very good audio. > > Cheers, > Mark F... > VK3ZMF / VK3KW > KX3 with the lot # 1675 > KXPA100 # 530 > PX3 # 233 > > > -----Original Message----- > > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of > > Carl Jón Denbow > > Sent: Saturday, December 27, 2014 11:03 AM > > To: elecraft@mailman.qth.net > > Subject: [Elecraft] Heil Proset KX3 Element? > > > > I have a Heil Proset with the ic element. I get fairly lack luster > > audio > reports. > > What would be the best replacement element to use? I assume that it's > > a fairly simple operation to replace the ic element with another one. > > It > looks > > like there are just two phillips screws holding on the cover of the > element > > box at the end of the boom. > > > > Any and all ideas, experiences, etc., appreciated. > > > > 73, > > Carl > > > > ================================================= > > Carl Jón Denbow, N8VZ > > 17 Coventry Lane Athens, Ohio 45701-3718 > > > > c...@n8vz.com > > www.n8vz.com > > EM89wh > > IRLP 4533 Echolink 116070 > > PSK and JT65 Forever! > > ================================================= > > > __________________________________________________________ > > ____ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net Please help support this email > > list: http://www.qsl.net/donate.html > Message > > delivered to vk3...@bigpond.com > > __________________________________________________________ > ____ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to gold...@charter.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com