Hi Don, I've had this problem for several years and I only started using QSK this year. Further, the problem is also present when using RTTY (AFSK). I don't use SSB very often so I have not noticed if the problem is present with that mode.
All firmware for the K3, P3, and SVGA are the latest, either production or beta. I run WriteLog for both CW and RTTY. But for the testing I just posted about I had no PC applications running and the K3 in test mode. My K3 settings are generally all default values. If there is something specific needed I can look it up and advise. I checked the refresh rate on the P3 and it was set at 10ms which is per the manual. I raised it to 20ms and the problem persists. I raised it 100ms and the problem persists. 73, Mike K2MK Don Wilhelm-4 wrote > In addition, there is now QSK OLD and QSK NEW which now adds another > variable into the K3 'return to RX after TX equation'. > > If all parties responding with additional information would state which > they are using, perhaps it will be easier to get to the root cause of > this behavior. > > I have no idea if this is a factor in the "it does it" or "it does not > do it here" statements, but information related to the relevant K3 setup > and applications running on the computer certainly seem to be a part of > it (even though some have seen it without computer applications). > > I don't think I have seen any reports of the problem being encountered > with non-SVGA P3s. > > 73, > Don W3FPR -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-bug-tp7596500p7596527.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
