Don, Thank you for the reply! I will follow your advice, a new encoder is now on the way from Elecraft.
73, Rickard SA2CIR Don Wilhelm-4 wrote > Richard, > > I don't know of any way to resurrect a failing encoder. The fact that > the switch works is entirely different - the switch function is not > related to the rotational function of the encoder. > > I would simply replace the encoder. > > As far as the fact that it works for the first 10 seconds after a power > up is not really significant, that depends on the starting position of > the encoder. If the output from the encoder does not cycle in the A to > B (or B to A) sequence, the control will not be smooth, even though > subsequent (through frustration) rotation of the encoder will produce > some results. > > 73, > Don W3FPR -- View this message in context: http://elecraft.365791.n2.nabble.com/Re-K3-front-panel-encoders-tp7594936p7596631.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
