Darryl,
Digital modes normally use only the left channel, although there are
some applications that allow you to switch it to the right.
The K3 Line In and Line Out jacks are stereo type, but there is no
connection to the ring contact, and the audio will only appear on the
normal left channel.
So for the purpose of data modes on the K3, there is no need to be
concerned about channel separation.
73,
Don W3FPR
On 1/6/2015 1:25 PM, KK5IB wrote:
I have a Tascam US-322 USB Audio Interface to connect to my K3 for digital
use. I picked it because it has support for Windows 7/8 and 24 bit/96 KHz
resolution. It has standard L/R in and out connections plus controls. To
connect it to the K3, is it as simple as K3 Stereo line out to the 322
stereo line in, and K3 Stereo line in to 322 line out, with USB cable to
computer? I suppose it's best or correct to maintain the L/R stereo
separation in the cables, that is using both channels. Any help or
instructions would be appreciated.
Darryl, KK5IB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
