I am setting up for 60m operation. The configuration is a K3/P3 with microHAM StationMaster controlling a SixPack switch. On all bands except for 60m, the P3 operates normally. On 60m, there is something odd going on.
At top of the screen, the correct frequency from the K3 appears but the range is shown as -1 to -1 and cannot be changed with the Span control. When I press Span, Span: <clock symbol> and "nan" shows up. As I recall from my C/Unix days, "nan" means "not a number" and usually results from an attempt to divide by 0 or some other operation that does not return a value. Anyone have a clue? Please email direct as I get the digest. It is 1500 here in RI and I have time before calling elecraft support. Jim/N1NK [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
