This ist he connection between frontpanel and motherboard Earlier k3 has no goldcontacts Just remove scews around frontpanel pull off frontpanel And clean contacts maybee with contactspray This will help for some time (month or years)
You can also get replacement connectors from elecraft see http://wb5bkl.blogspot.co.at/2012/07/elecraft-k3-p30-and-p35-replacement.html 73 Oe6kyg Klaus -----Ursprüngliche Nachricht----- Von: Elecraft [mailto:[email protected]] Im Auftrag von Arie Kleingeld PA3A Gesendet: Donnerstag, 22. Jänner 2015 13:31 An: [email protected] Betreff: [Elecraft] K3 : 8 ERR messages Hi all, Starting this week, my K3 #1255 (year 2008) started showing ERR messages when I swithed it on. First ERR message was ERR BP1. After pressing any button of the K3 the following messages appeared: ERR LPF, IO3, IF1, XV3, AT3, PA1 and BP3. After cycling through these messages, they are gone and everthing works as normal. Switching the K3 off and on again immediately after that, the same thing happens again. Switching the K3 off and on after 5 mins of operation, everything is normal, no messages at all. Could this be caused by an empty back-up battery? Wonder if other owners had a simular problem. 73 Arie PA3A ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
