Sonny,
Try this.
Go to SSB mode, then go to the menu item "MIC BTN" and rotate VFO A
until it displays "OFF." Also set MIC BIAS to OFF.
Then go back to data mode, plug in your cables and operate.
When you want to use the microphone again, go back to SSB mode and set
up the MIC BIAS and MIC BTN for your particular microphone.
At this time, the MIC menu items can;t be changed inDATA modes, but that
may change in the future.
73,
Lyle KK7P
The mic socket in the KX3 is a 4-conductor type. If not wired
correctly (e.g., it's *not* the 4-conductor configuration of an
iPhone!) you can key down the rig as soon as the plug is inserted.
...Every time
I connect the MIC input to the sound card output, the rig keys down
until I
unplug the red cable from the input.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
