TRS = Toy Radio Shack, or what?
Phil W7OX
On 1/29/15 9:13 AM, Walter Underwood wrote:
You can use a TRS plug on the KX3 if you set MIC BTN to OFF.
wunder
K6WRU
CM87wj
http://observer.wunderwood.org/
On Jan 29, 2015, at 8:55 AM, Phil Wheeler <[email protected]> wrote:
The mic socket in the KX3 is a 4-conductor type. If not wired correctly (e.g.,
it's *not* the 4-conductor configuration of an iPhone!) you can key down the
rig as soon as the plug is inserted. This could be your problem, Sonny
73, Phil W7OX
On 1/29/15 8:32 AM, RB3 wrote:
Good morning!
I've only had my KX3 for a month, but I've enjoyed it so far. Recently, I
have been trying to operate digital modes (RTTY and PSK31) using my SB
Audigy 2 NX external sound card and several different programs (fldigi,
KComm, HRD, and a few others). I am using the KX3USB for control and the
KX3-PCKT cables (Red, Green, and I/Q) for input/output/analyzer. Every time
I connect the MIC input to the sound card output, the rig keys down until I
unplug the red cable from the input.
I've tried using different selections in the programs for PTT (serial, VOX,
software), but nothing seems to work. I am aware of other options out
there, such as the RigBlaster and SignaLink USB, but I was hoping to be
able to use the equipment I already have.
Any suggestions would be most welcome.
73,
Sonny
KC3DNN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
