Jim

How did you determine that the LZ1AQ amplifier is not a differential amp? the diagrams lead me to believe that it has differential inputs. Page 29 shows the specification item 10 which states that the inputs are balanced. What am I missing, where should I be looking?

73

David
G3UNA


On Jan 31, 2015, at 6:02 PM, jim <[email protected]> wrote:


The LZ1AQ amplifier is NOT a differential input amp, rather it is referenced to ground.

This can have significant issues as it relates to common mode noise.

As a result of my research, I ended up with a Pixel loop. The amp has great characteristics, differential input, uses an A.C. wallwart for low noise, and the install instructions isolate the amp from any ground.

The loop interface also has a control line input from your rig, that controls an internal relay, so the amp is protected when you transmit. The loop was designed by hams.

The mechanical design of the loop is excellent, using welds at the aluminum joints.

I have no interest in the Pixel company, just a very satisfied customer. So satisfied, I bought two of them and phase them with a DX Engineering NCC-1 phaser.

Jim
W6AIM



-----Original Message-----
From: Elecraft [mailto:[email protected]] On Behalf Of Wouter Jan Ubbels
Sent: Saturday, January 31, 2015 12:28 PM
To: [email protected]
Subject: Re: [Elecraft] Elecraft Digest, Vol 129, Issue 41

Hi Paul,

I can recommend LZ1AQ´s active loop antenna.
See

http://active-antenna.eu/

It offers a nice variety of antenna configuration options, and it plays very well here as a separate RX antenna at my urban & noisy QTH. The unit is of high quality, and very well documented. I am using it with my KX3 and a homebrew switchbox which uses reed relays for QSK switching, controlled by the KX3 PTT output taken from the ACC2 jack.

73,

Wouter Jan PE4WJ



Message: 2
Date: Fri, 30 Jan 2015 19:15:32 +0000
From: Paul Barlow <[email protected]>
To: <[email protected]>
Subject: [Elecraft] Separate Receiving Antenna
Message-ID: <[email protected]>
Content-Type: text/plain; charset="us-ascii"

Dear Elecrafters,

I have a very small and odd shaped garden in which to play Ham Radio.
I have a K3 (and a K2 and... ), I run QRP CW and I was wondering if
anyone had experience of using active loop antennas as receiving
antennas to lower the noise floor. I was looking at Wellbrook's
Website this afternoon, and I see that their loops get good reviews on
EHam. I was wondering what experience you guys might have with these
and similar antennas.

73, Paul EI5KI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to