I'd say you have RX SHFT set to "nor" instead of "8.0". If you set your sidetone to 550Hz, and 8kHz shift is not enabled, then you'll pick up the image 2 * 550 Hz = 1.1 kHz away, which is what you are reporting.
Remember that RX SHFT is a "per-band" setting, so you need to enable it separately for each band. 73, Matt VK2RQ > On 16 Feb 2015, at 12:17 pm, David Orman <[email protected]> wrote: > > Hi, > > I've been performing all of the "All-Band Receive Opposite Sideband and > I.F. Image Nulling" steps without issue using my PX3 (and AA-54) as a > signal generator. I'm at the last section, "RX SHFT=8.0 I.F. Image (16 kHz) > Nulling", and am having trouble. Following the directions, and setting my > KX3 16KHz up from the signal source: > > 7. Optimize RX SHFT=8.0 I.F. image gain and phase settings as follows: a. > Set both the signal source and KX3 to the target band (starting with 160 > m). Recall that the VFO should be set 16 kHz higher than the signal source. > Make sure you’re in CW mode. (Note: You can change bands and modes from > within the RXSBNUL menu entry.) You should hear a strong signal, and see an > Smeter reading of between S9 and S9+30 dB. If not, adjust the preamp > setting or the RF source level. > > This step, I do _not_ hear a strong signal, I hear no signal at all. If I > turn on RIT to -1.1, I hear a strong signal (looking at the next step.) > > What am I doing wrong/missing? > > Thank you, > David > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
