Have you tried the PA Key Out line to your amp??
Or maybe the PA Key Out is only on the KPA100 module
and not on the basic K2.
de Joe, aa4nn
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, January 09, 2006 12:24 PM
Subject: [Elecraft] K2 relay circuit?
Does any have a switching circuit for a K2 that will activate the relay in
an amplifier? My 11-year-old Kenwood is in for a repair, and it may be a
while before it's back in the shack. In the meantime, I'm driving an
Ameritron ALS-500M solid state amplifier with 7 watts from my K2.
That works well but requires me to key the amp relay (I use a pushbutton on
a cord) as I key the K2 with the mic's PTT switch.
The voltage on the amp keying line is 10 V DC, and the current when keying
the amp is 120 mah.
Dave, W6KOW
K2 # 5120. Sometime in the six few months I'll build the K2 100-watt
internal amp.
_______________________________________________
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
