Make that read “transverter” in first line. Thanks a lot to Apple auto spelling correction….
Lew Phelps N6LEW Pasadena, CA DM04wd Elecraft K3-10 / KXV144 / XV432 Yaesu FT-7800 [email protected] www.n6lew.us Sent from my Mac Pro 256-Array Supercomputer (9.42 teraflops) > On Feb 25, 2015, at 9:48 PM, Lewis Phelps <[email protected]> wrote: > > My XV432 transporter has suddenly developed a serious problem. Receive mode > works fine, but when I try to transmit, it instantly shuts down, apparently > because of a bad SWR mismatch or similar problem. > > I’ve checked my cables, and replaced them. I’ve checked all the settings on > the Main Menu. I’ve tried with two different antennas and a dummy load, and > with differing coax cables. I’ve checked all the on-board coax plugs on the > KIO3 board, checked to make sure the KIO3 board is properly seated, etc. > Transmit power is set at 0.1 watt. Nothing resolves the problem. Any > suggestions as to what I have failed to look for? Any suggestions as to how > I can differentiate between transverter problem and a KIO3 problem? > > Thanks in advance for any assistance. > > Lew > > > Lew Phelps N6LEW > Pasadena, CA DM04wd > Elecraft K3-10 / KXV144 / XV432 > Yaesu FT-7800 > [email protected] <mailto:[email protected]> > www.n6lew.us <http://www.n6lew.us/> > > Sent from my Mac Pro 256-Array Supercomputer (9.42 teraflops) > > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
