Thanks, Dick, found the problem, mine is now settled around 4K. Much appreciated...
Jeff On Sun, Mar 1, 2015 at 10:35 AM, Dick Dickinson <[email protected]> wrote: > I get about 3.6K across the input Anderson Power Poles of my early, but up > to date K3/100. > > > > > > 73, > > Dick - KA5KKT > > > > ---------------------------------------------------------------------------- > ------------------------------------------------------ > > > > Hi All, getting prepped for ARRL DX next weekend and so I decided to > > do the KPA3 update on my old K3 (#476). It involves replacing some > > pins between the RF board and the KPA3 module to prevent melting. > > > > I did the update and it went reasonably well. The last check is to > > measure resistance across the 12V terminals to make sure its not a > > dead short. The documentation says it should be over 2000 ohms, but I > > measure open circuit. Can someone check for me what they see across > > 12V terminals on a regular working K3? > > > > This is probably a pretty stupid question but since I didn't build > > this K3 I'm not sure what to expect. > > > > Thanks much, > > > > Jeff N6GQ/YN2AA > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
