I get about 3.6K across the input Anderson Power Poles of my early, but up to date K3/100.
73, Dick - KA5KKT ---------------------------------------------------------------------------- ------------------------------------------------------ Hi All, getting prepped for ARRL DX next weekend and so I decided to do the KPA3 update on my old K3 (#476). It involves replacing some pins between the RF board and the KPA3 module to prevent melting. I did the update and it went reasonably well. The last check is to measure resistance across the 12V terminals to make sure its not a dead short. The documentation says it should be over 2000 ohms, but I measure open circuit. Can someone check for me what they see across 12V terminals on a regular working K3? This is probably a pretty stupid question but since I didn't build this K3 I'm not sure what to expect. Thanks much, Jeff N6GQ/YN2AA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
