Wouldn't that need to be dampened a lot. What happens if there is QRN, you wouldn't want to be pushing the real stuff down. It would NOT be a simple function, and there would be wide variation on what seemed "slick".
73, Guy On Fri, Mar 6, 2015 at 10:16 AM, Joe Subich, W4TV <[email protected]> wrote: > > I don't want to save the REF LVL. I want to save its relationship to >> the noise level. >> > > I agree. Put another way, I'd like to see a reverse baseline "clamp" - > something along the line of holding REF LVL 5 dB below the average > noise level. > > 73, > > ... Joe, W4TV > > > On 2015-03-06 7:56 AM, Vic Rosenthal 4X6GP/K2VCO wrote: > >> Here is something I would like to see on the P3. >> >> The P3 saves the REF LVL setting per band. But of course the noise level >> on a given band varies as conditions change, and I find myself often >> adjusting the REF LVL. >> >> The optimum setting is with the REF LVL just below the noise level. >> Setting it higher loses detail, and setting it lower fills the waterfall >> with noise. >> >> What I would like would be to adjust the REF LVL to optimum with respect >> to the noise level and then save this relationship. Then I would like to >> be able to push a function button to automatically adjust the REF LVL to >> re-establish the same relationship. >> >> This would make the readjustment, which I find myself making every few >> minutes sometimes, much quicker and easier. >> >> I don't want to save the REF LVL. I want to save its relationship to the >> noise level. >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
