I concur 100% with W9FAM's observations, and would add that the same benefit applies to SPLIT operation as well as (less importantly) to [SSB + CW] operation. In fact, it works so well that I have turned QRQ mode OFF. I can hear a slight change in 'weight' between QRQ engaged or disengaged (the state of which still changes as a function of engaging RIT, IT, SPLIT ...), but with the new Synth board, I actually prefer the timing w/ QRQ off. With QRQ disengaged, maximum sending speed is 50 WPM, whereas w/ QRQ engaged, the maximum speed is 100 WPM. I only use paddles, and I have no ambition (or capability) to send with paddles beyond 50 WPM, so for me, QRQ-OFF mode is PERFECT.
Any and all other KSNY3A improvements/enhancements are just icing on the (K3) cake. 73, Dale WA8SRA > Barry - > > It will be interesting to hear from someone who has done that... but I put > two new synth boards in the K3 of W9FAM, and he is THRILLED at being able > to run QRQ without having to be in the QRQ mode, thus being able to use > RIT, without degradation of the CW his K3 is putting out. > > For him that is important every moment he is on the air... He realizes he > may never be aware of receive improvement, but knows the upgrade was well > worth it. > .... ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
