No, but if you change bands on the K2, a quick tap of the "dit" paddle will trigger the frequency counter in the KXPA100, and instantly recall the band pass filter/antenna selection/tuning solution for the new frequency. If you want the greater degree of integration that you mention below, you need to look at the KPA100/KAT100.
That said, it may well be possible for Elecraft to implement the sort of integration you mention between K2 and KXPA100; it would come down to whether they see it as a worthwhile investment of engineering resources. 73, Matt VK2RQ > On 27 Mar 2015, at 6:45 am, Jessie Oberreuter <[email protected]> > wrote: > > > Will connecting a K2's serial TxD/RxD lines to the KXPA100 (over the RJ45 > jack) allow the KXAT3 to automatically follow band and VFO changes? I presume > I would need to set the BPS to 4800 and either poll the K2 or turn AutoInfo > on for this to work. The assumption here is that the RJ45 TxD/RxD lines are > carrying standard serial data at standard bit rates. If true, I would also > expect to be able to talk to the K2 through the KXPA100 just as I would talk > to a KX3. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
