Hi Ross, Yup, tried that - powered the K3 off, waited 30 secs, powered on and held the Power button down until the red TX light comes on and MCU LD appears - still no comms to the iMac.
Ken > On 29 Mar 2015, at 14:29, Ross Primrose <[email protected]> wrote: > > Check the owner's manual section on forcing a firmware download.... > > 73, Ross N4RP > > On 3/29/2015 9:22 AM, K M Dailey wrote: >> I just tried to update my K3/P3 with the latest firmware and the process has >> failed, leaving me with a pretty much dead K3 - MCU, FPF and DSP1 all >> showing as nothing installed, and the K3 Utility is reporting no comms with >> the K3. The K3 itself powers on, but the display is completely blank. >> >> I’m running on Mac OS X 10.10 with the latest K3 Utility. >> >> Any ideas how I can get my radio working again? (:-( >> >> Thanks, >> >> Ken, G0RVH >> >> >> >> -- >> Ken Dailey >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] <mailto:[email protected]> > > > -- > FCC Section 97.313(a) “At all times, an amateur station must use the minimum > transmitter power necessary to carry out the desired communications.” -- Ken Dailey ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
