The output voltage is adjustable internally. There is a well marked pot on the board, I forget where exactly, but you can find it easy enough. But I guess there's not much reason to adjust if they are now set up for 14.1 VDC.
73, Drew AF2Z On Tue, 14 Apr 2015 16:01:15 -0700, you wrote: >I suspect they put APP on the front because they have a power rail down the >right side and put the three-way terminals on the back. According to Murphy >the terminals will always be in the least convenient place so if you need >them to be in front, they will be in the back. >Incidentally I note they changed the specs in 3-2012. Was 25/30A @13.85V. >Now its 25/28A @ 14.1V. Not a lot of difference I know. >73 >Fred, AE6QL > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
