Ramon,
You need to use Hamlib or Rigcat with Fldigi - I think Hamlib is easier,
but YMMV. Configure Fldigi to use whichever you have chosen.
Connect the K3 to a COM port on your computer and tell Hamlib (or
Rigcat) which port that may be, and it should work.
I 'hear tell' that FLRIG can give the same capability, but I have not
tried it.
73,
Don W3FPR
On 5/6/2015 8:59 AM, Ramon Tristani wrote:
I have successfully used the K3 with FLDigi and a Signalink USB for
quite some time now. However, I have never tried to control or even
display the frequency on my FLDigi screen (Mac or PC). What connection
should I have to the K3 in order to achieve this? How should I
configure FLDigi for that purpose? Any help will be most welcomed!
Thanks!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
