Joshua, I'd just make up my own with some cable and the desired connector. I just made one for $13 with a nice switch from Amazon. Very nicely built and heavy enough to not slide around. Has rubber pads on top and bottom. You provide your own wire and connector. Works well and is small enough to pack up easily.
Search for: Linemaster T-91-S Treadlite II Foot Switch http://www.amazon.com/gp/product/B002P4XREA/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1 Warren, KD4Z On 5/19/2015 11:23 AM, Joshua Gould, K8WXA wrote: > How would I go about attaching a foot pedal switch to my KX3 for PTT to use > with a headset? Most pedals I've seen have a 1/4" plug while the adaptor for > the ACC2 port has a 3.5mm jack. Could I use an adaptor for that jack or > possibly cut the 1/4" plug off and wire in a 3.5mm plug? > > I'm planning ahead for future upgrades to the station. > > 72, > Joshua Gould > K8WXA > EM89pn > > KX3# 7480 > NAQCC # 7704 > OMISS # 9948 > 4SQRP # 990 > > This message was sent from an iPhone. Please excuse any typos and the brevity > of responses > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
