A very similar experience here as well. One thing I dislike, is the flashing PRE when preamp 2 is on. It is annoying to see the constant flashing, to me that generally means there is something wrong. But it looks like that part of the K3’s display doesn’t have the ability to display something else.
It should be treated the same as the noise blanker for example, which has multiple settings, yet only NB displays when it is on. 73 de Sebastian, W4AS > On Jun 7, 2015, at 10:07 AM, Jim Sheldon <w...@cox.net> wrote: > > Right now 6 meters is marginally open between KS and the Southeast US. (NC > down to FL). First chance I've had to check out the "Preamp 2" function on > the new KX3VB. Boy what a difference it makes. Had it set to Preamp 1 and > just barely hearing signals so went to Preamp 2 and really good copy on > everyone I could hear. Makes a really decent 6 meter rig out of an older K3 > without the PR6. > > Have not had a chance to test it on 10 and 12 meters other than observing a > very distinct increase in background noise with it in Preamp 2 mode as both > bands were not open when I tested the KXV3B after finally getting it enabled > yesterday. This morning 6 is open so that one gets tested first. > > Overall I'm very pleased with the operation of this board and no negative > issues noted other than the initial lack of information in the documentation > on how to enable it. > > Jim - W0EB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
