On a K2, the freq display is way, way off; e.g., on 40 meters it's really receiving about 0.5 mHz lower. I tried to run CAL PLL but get INFO 232. The PLL process appears to start, momentarily displaying 11,27164 mHZ, then aborts in about a second with the INFO 232 error. I'm absolutely positive before running PLL that the VFO shows a 40 meter freq and the probe is plugged into TP1.
The CAL FCTR readings for the TPs are: TP1 = 11271.8(4); TP2 = 4913.55; TP3 = 12097.9(6) (Numbers in parentheses flicker between an adjacent digit, but values are otherwise stable). Probably not relevant, but more background. This is my friends K2 for which the KPA100 would not work. I traced problem to blown diode in swr bridge, fixed it, and that problem was solved. Also, I Initially I made a change in the set-up menu for the k60xv, not realizing it was installed. Nothing else was touched--at least intentionally. Ideas where I can start? I do have my own working K2 for comparison purposes. Dick, K0KK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
