The usual K2 headphone jack failure results in the speaker going dead. To fix it requires replacing the jack, but a workaround is to short two pads together. The speaker will then run all the time, whether or not there are headphones plugged into the front of the rig. The speaker can be cut off by inserting a plug into the external speaker jack or by a switch. I put a photo showing which pads to jumper together on my web page. The link (and brief text) are near the bottom of this page: http://www.qsl.net/ve3sma/downloads2.html while the photo itself is at http://www.qsl.net/ve3sma/K2HeadphoneJackSwitchBypass.jpg Thanks to Don, W3FPR, for identifying the correct pads for me. 73,Steve VE3SMA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
