Aha - two questions at once.
My instruction manual says to tap [3].

"
For the front-panel mic only, additional microphone
gain can be enabled by tapping 3 . Use this only for
very low-output mics.
"
I also tried 4,5, and 6 . . . I should have kept going  :-)

I asked Elecraft about this. Apparently it is an error corrected in the
"errata" document. Sigh.

Anyway, yes, with this boost function I can run the mic gain around 30 and
even with FP.L selected.

Thanks,
Ken

-----Original Message-----
From: [email protected] [mailto:[email protected]] 
Sent: Thursday, July 02, 2015 12:24 PM
To: Ken_ke2n
Cc: [email protected]
Subject: Re: [Elecraft] Heil HC-7 Dynamic Element with K3/0 Setp

Hello Ken,

I use the Pro 7 w/ the HC7 element as well.

Tapping the "7" key while in "MIC SEL" will bring in the extra preamp which
in combination with FP.H will most likely be too much gain. If it is, try
leaving the "7" preamp engaged but drop back to FP.L and see if that gives
you enough gain. I would NOT suggest using both the "7" preamp and FP.H
though.

73, Dale
WA8SRA

> I just got a pro 7 to use with my K3.
>
> Definitely sounds better with the high selection (FP.H not FP.L) and, 
> of course, no bias as this is a dynamic element - it will short 
> circuit the bias.
>
> The output of this element does indeed seem slightly low (compared 
> with
> HC-4) but if you close-talk it (it's a boom mike after all) and use a 
> gain setting of about 40 (out of 60) I find there is enough to get 6 
> bars ALC on voice peaks.  There is lots  of low-end response, so you 
> will want to play with the equalizer to get either rag chew or dx-test 
> response.
>
> It would be nice if the K3 had about 3 dB more audio gain ... the 
> manual says that if I tap [3] in the mic select menu there should be more
gain.
> But I get "N/A"  ;-(
>
> Ken
>
>
>
> -----
> 73
> Ken
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/Heil-HC-7-Dynamic-Element-with-K3
> -0-Setp-tp7596221p7604527.html Sent from the Elecraft mailing list 
> archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> [email protected]
>



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to