On 2015-07-02 2:06 PM, K4ia via Elecraft wrote: > The RF Gain control on the Sub RX acts weird. It will seem deaf > until 3 o'clock on the dial.
Perform an RF Gain calibration using an XG2/XG3 and the automated procedure in the K3 Utility software. > During Field Day, if I hit the Esc Key or the paddle to interrupt a > CQ (N1MM+) , my external keyer (MKUSB) would stop keying but the rig > would stay in transmit mode. Make sure you *do not* enable *any* of the "PTT via Radio Command" option in the N1MM+ radio port dialogs. Limit PTT to hardware (RTS or Winkey PTT) sources. 73, ... Joe, W4TV On 2015-07-02 2:06 PM, K4ia via Elecraft wrote:
The RF Gain control on the Sub RX acts weird. It will seem deaf until 3 o'clock on the dial. Once past 3, the gain jumps up and then is linear if you turn it down. This pattern will repeat if you turn off the Sub Rx and turn it back on again. The main RX Rf Gain control is smooth and linear all through the dial range. I have done the RX calibration routine on both receivers. During Field Day, if I hit the Esc Key or the paddle to interrupt a CQ (N1MM+) , my external keyer (MKUSB) would stop keying but the rig would stay in transmit mode. Tapping the XMT button would put the rig back to RX mode. Ideas?
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
