> On Jul 11, 2015, at 1:48 PM, Tom Field <[email protected]> wrote: > > I've been using my K2/100 for a couple of years, and have been very > satisfied. I have noted some drift in the freq, so decided to go through a > complete realignment process. > > On Page 65 of the manual it describes a measurement of the BFO range as > being 4-6 kHz. I measure 3.52 kHz. Question one, is this sufficiently out > to be of concern? and question 2, what are the next steps to correct any > problem?
So long as you can set the filters properly, I wouldn’t worry about the BFO range. When I added the RTTY mode and set my filters for 1500 Hz center frequency, I had to pad the BFO with a small capacitor to get enough range. Bill Coleman, AA4LR, PP-ASEL Mail: [email protected] Web: http://boringhamradiopart.blogspot.com Quote: "Not within a thousand years will man ever fly!" -- Wilbur Wright, 1901 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
