Can't speak for everyone else, but I have all 100 memories programmed. I just have them programmed in 160 - 6m order, 4 per band. Each of the 4 has one each CW A/B, Data, SSB1, and SSB2 (tailored to the band, of course). It's easy enough to spin VFO A to get to the right band and mode, then tune from there. Most of the programmed freqs are "watering hole" type frequencies.
For example, the four memories on 30m are: Showing VFO A and b - 21: 10.100, 10.110 CW 22: 10.106, 10.116 CW 23: 10.1406, 10.1387 Data A (PSK typical center and WSPR) 24: 10.1415, 10.1425 Data A (Olivia watering holes) For the remainder, I have a bunch of Army MARS freqs, some SWL band centers, a few AM stations, and WWV/CHU, etc (utility freqs) and so on. Anyone can do pretty much the same thing with the M1 - M4 quick memories. I just like general memories little better, because recall causes the band change without a separate action. 73, matt W6NIA On Mon, 27 Jul 2015 12:10:37 +0000, you wrote: >I wonder how you guys with 100 programmed memories manage to remember >what is in what memory? >Personally if the number gets to be greater than 5, I have no clue. It >becomes trial and error. > >73 de Brian/K3KO Matt Zilmer, W6NIA -- "Always store beer in a dark place." -R. Heinlein ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
