Following up on Salvo's post: Rich, I believe you said you are using
N1MM+. If that is the case, open the N1MM+ Configurer, select the Mode
Control tab, and on the right side, look to see what is selected for
"Mode sent to radio" for RTTY. If this is set to RTTY, N1MM+ will put
the K3S into FSK D mode, which will result in an unmodulated carrier if
there is nothing connected to the FSK pin on the AUX connector on the
K3S. To use AFSK A, change the "Mode sent to radio" to AFSK.
73,
Rich VE3KI
IW1AYD wrote:
UR radio is FSK, UR computer is AFSK. Isn't?
I would double check the Radio SubMode
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
