On Aug 12, 2015, at 5:09 AM, Richard Ferch <[email protected]> wrote: > Following up on Salvo's post: Rich, I believe you said you are using N1MM+. > If that is the case, open the N1MM+ Configurer, select the Mode Control tab, > and on the right side, look to see what is selected for "Mode sent to radio" > for RTTY. If this is set to RTTY, N1MM+ will put the K3S into FSK D mode, > which will result in an unmodulated carrier if there is nothing connected to > the FSK pin on the AUX connector on the K3S. To use AFSK A, change the "Mode > sent to radio" to AFSK. >
That did it, thanks! Rich KE1B ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
