I believe the software is available on the AMSAT website and if you sign
up for AMSAT membership they will allow the download and send a CD of
the available software etc.
Jim, W4ATK
On 8/17/2015 8:08 PM, Edward R Cole wrote:
Date: Mon, 17 Aug 2015 12:41:45 -0800
To: Elecraft Reflector
From: Edward R Cole <[email protected]>
Subject: Re: [Elecraft] Full duplex for Sat work?
Jerry,
Its tempting to think maybe the sub-Rx could be used duplex with
main-Tx in the K3, but as you discovered its not possible as DSP is
in use for Tx or Rx, but not both simultaneously.
There is a kind of solution, though, if you own both K3 and KX3:
Set K3-2M to listen on 145-MHz and use K3 with 432 transverter to
transmit 435 (or vice versa). The "big" issue is linking frequency
control of both radios for tracking Doppler changes. This will take
sw via ports in each radio.
This will be a third-party sw source an not "likely" accomplished
thru firmware updates. Amsat has had what they call the "One true way
of tracking"; have to research that to find out if it still exists.
I know a ham that might develop such sw but have not contacted him,
as yet.
73, Ed - KL7UW
http://www.kl7uw.com
"Kits made by KL7UW"
Dubus Mag business:
[email protected]
73, Ed - KL7UW
http://www.kl7uw.com
"Kits made by KL7UW"
Dubus Mag business:
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
